S-201W
Adjustable iPad Stand, Tablet Stand Holders。
S-201W series normal single switchingpower supply
Features:
·AC input voltage range selected by switch
·Small volume，low weight，high efficiency
·Protections:short circuit/over load/over voltage/overtemp
·cooling by free air convection
·LED indicator for power on
·100% full load burn-in test
·2 Years warranty
|
Model |
S-201-5 |
S-201-12 |
S-201-15 |
S-201-24 |
S-201-27 |
S-201-48 |
|
|
output |
DC voltage |
5V |
12V |
15V |
24V |
27V |
48V |
|
Voltage tolerance |
±2% |
±1% |
±1% |
±1% |
±1% |
±1% |
|
|
Rated current |
40A |
16.5A |
13.4A |
8.3A |
7.4A |
4.2A |
|
|
Current range |
0~40A |
0~16.5A |
0~13.4A |
0~8.3A |
0~7.4A |
0~4.2A |
|
|
Rated power |
200W |
198W |
201W |
199.2W |
199.8W |
201.6W |
|
|
Ripple&noise |
120mvp-p |
150mvp-p |
150mvp-p |
180mvp-p |
180mvp-p |
200mvp-p |
|
|
DCvoltage ADJ.range |
±10% |
±10% |
±10% |
±10% |
±10% |
±10% |
|
|
input |
Voltage range |
90~132VAC/180~264VAC(selected by switch)，255~373VDC |
|||||
|
frequency |
47~63HZ |
||||||
|
AC current |
4.5A/115VAC，2.5A/230VAC |
||||||
|
efficiency |
78% |
80% |
80% |
82% |
82% |
83% |
|
|
Inrush current |
Cold start current25A/115VAC，50A/230VAC |
||||||
|
Leakage current |
< 3.5mA/240VAC |
||||||
|
protection |
overload |
Rated output power105%~135% start over load protection |
|||||
|
protection type :rated current limit，auto-recovery after fault condition is removed |
|||||||
|
Over voltage |
6.8~8.2V |
15.6~17.8V |
18.6~20.8V |
30.6~33.2V |
33.2~35.6V |
54.8~56.6V |
|
|
Protection type:hiccup mode，auto-recovery after fault condition is removed |
|||||||
|
Over temperature |
inner temperature≥85℃start over temperature protection |
||||||
|
Protection mode:cutoff output，auto-recovery after temperature become normal |
|||||||
|
environment |
Working temp,humidity |
-10℃~+60℃，20%~90%RH |
|||||
|
Storage temp,humidity |
-20℃~+85℃，10%~95%RH non-condensing |
||||||
|
Withstand vibration |
10~500HZ，2G10min/1cycle，period for 60 minutes，each axes |
||||||
|
safety |
Withstand voltage |
I/P-O/P:1.5KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC |
|||||
|
Isolated resistance |
I/P-O/P,I/P-FG,O/P-FG:100Mohms/500VDC |
||||||
|
Fit standard |
Safety standard |
Compliance toUL1012 |
|||||
|
EMC standard |
Compliance toEN55022，CLASSA |
||||||
|
others |
Dimension |
215*115*50mm(L*W*H) |
|||||
|
Weight/packing |
0.87kg/24pcs/22kg/0.049 m³/1.72CUFT |
||||||
|
note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and25℃of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. |
||||||
